Frequently Asked Questions
The questions our customers ask most, answered.
Machines and materials
Can you build lines for nitrile gloves as well as latex gloves?
Yes. The same line produces latex and nitrile gloves. It can also make surgical gloves; the line then runs about 15–20% slower and uses different formers.
Which products and materials can you dip?
We build dipping machines for products in latex, nitrile, neoprene, polyisoprene, PVC and silicone: gloves, condoms, finger cots, balloons, medical balloons, bladders, baby teats and pacifiers, implants, swim caps, latex sheets and special custom products.
What output per hour can a line reach?
Every dipping line has its own output. There are too many different machines and options to give one number. The page of each machine on our website gives an indication. If you want to know exactly for your product, send us a message by WhatsApp, e-mail or the contact form.
Can a line run 24 hours a day?
Yes. Our lines are built for continuous production; the Condom Monorail line runs 24 hours a day, with the complete line at floor level.
What is the Monorail, and why does it matter?
The Monorail is proven Dutch monorail technology, applied to dipping lines: a chain that moves in every direction and puts the whole line at floor level. Every station is easy to reach for checking, cleaning and maintenance, and the line can be extended or changed later.
Do you supply formers?
Yes. We supply formers for every dipping process, standard or custom-made exactly to your product, and mounted for maximum output.
Price and quotation
What does a dipping line cost?
We cannot give a price in advance. It depends on everything you want and on the design: the product, the sizes, the output per hour, the number of shifts and how automatic the line must be. That is why we first make a quotation in which everything is calculated. Tell us what you need, and we will make a tailored quotation.
What information do you need for a quotation?
Please tell us: the product and its sizes or weights, the output you need per hour, the number of hours or shifts per day, the size of your building, where your latex comes from, and the electrical voltage in your country.
How long does it take to build and start up a line?
Building a large line takes 9 to 12 months. Smaller lines are ready sooner. It depends on the product, the number of tanks, the length of the line and how it has to be built, so there is no single answer. Fill in the contact form on our website with your wishes, and we will give you an answer for your line.
Factory, people and service
Can you supply a complete factory?
Yes. Besides the dipping line we supply the equipment around it: mixing and storage tanks, laboratory equipment, prevulcanization, quality monitoring, product testing, packaging, ovens and leaching, and complete turnkey condom factories. We do not supply gamma sterilisation: that is done by specialised companies, sometimes only one in a country.
How many people does a line need?
That depends on everything you want to do yourself: mixing latex, running the line, testing, packing. So there is no general number for how many people a factory needs. With automatic stripping, few people are needed at the line itself, mainly to check the products. If you want to know for your factory, contact us by the contact form, WhatsApp or phone.
How much space and energy does a line need?
We calculate that as soon as we know what you want to make and buy. Tell us your wishes first, by the contact form, WhatsApp or phone. In general: a Monorail line stands at floor level and uses more floor area than a tall tower line, but the building can be much simpler and cheaper. Our insulated ovens are designed for low energy consumption.
Do you provide installation, training and after-sales service?
Yes. For a machine built by us, we do everything needed to make it run well: installation, commissioning, training on the machine and after-sales service. Spare parts are offered in the quotation, and we supply them too. We do not give service and training for a line built by someone else: we do not know that machine. If the builder of your line has gone out of business, we can discuss whether we can help.
Can you improve our existing dipping line?
Yes. We look at your existing dipping line and see how it can be better, faster and more reliable, as described on our Know-How & Upgrades page. We also advise on dipping tanks, chain systems, stripping systems and ovens. (Regular service and training we give only for lines we built ourselves.)
Can we see a machine running, or receive a video?
Our machines are custom-built, so there is usually no machine standing ready in a showroom. We do not put videos of our machines on the internet and we do not send them, because other companies would copy them. In a meeting we do bring videos and photos to show. They are only to look at: no copies are handed out.
Know-how and special wishes
Do you share process know-how, such as recipes and temperatures?
Process details such as compounds, settings, temperatures and dipping times are our own know-how, built up over many years. We do not simply give them away. If you want to use them, that is possible against payment, and we are glad to work with you.
Can we build part of the line in our own country?
Yes. We help you build as much of your dipping line as possible in your own country, with our know-how, technical guidance and practical experience.
Can you help from the rubber tree onwards?
Yes. We supply complete latex centrifuge plants that turn fresh field latex into dipping-grade latex concentrate, with room to grow into a dipping factory.
Do you have a small machine for tests or small production?
Yes. Our dipping robot has programmable dipping depth, movement and dwell time, and is used for laboratory tests and for thick or special products. We also build compact batch dipping machines.
Can you make our product for us (contract dipping)?
Yes. We arrange contract dipping and dip moulding of custom products in latex, nitrile, neoprene, silicone and polyisoprene: from your drawing to former, prototype and series production.
Quality and standards
Do your lines meet standards such as ISO 4074 for condoms or EN 455 for gloves?
Yes. Our lines produce products according to standards such as ISO 4074 for condoms and EN 455 for gloves.
Do you also supply testing equipment, such as a leak test or a burst test for condoms?
Yes. We supply complete turnkey factories, and the testing equipment is part of them.
Types of lines
Do you also have a semi-automatic or simple line, to start small?
Yes, these are in our programme. That is no problem at all.
Can you convert an existing latex line to nitrile?
Normally that is no problem, provided the machine has the right lengths for the dipping tanks and the parts needed to switch over.
Can you make gloves with a foam coating, for example nitrile foam?
Yes. We also build machines for coating liner gloves (knitted inner gloves); see our Industrial Glove Dipping Lines page.
Formers and samples
Do you supply glass formers for condoms?
Yes. We buy them, or have them made to drawing by specialised glass companies.
Can you make formers from our drawing or 3D file?
Yes, that is no problem. Send us your drawing or 3D file.
Can you make test samples before we buy anything?
In our laboratory we can carry out various kinds of tests. Depending on the cost of the test, it may have to be paid for.
Delivery and payment
How are the machines shipped, and who arranges the transport?
We arrange the transport together with the customer, or we arrange it ourselves. It can go by truck or by ship; small parts can go by air.
What are the payment terms?
We have several ways of payment. Which one depends on the size of the order and on the machine; we agree it per quotation.
What warranty do you give on a line?
Normally we give one year warranty on the mechanical part (parts and labour). If we also took care of the chemical part (the process), that is covered too.
Technology in the factory
Do the machines work on the electrical supply of our country?
Yes. Tell us in advance the voltage, the frequency and the available power (amperes) of your supply, and we adapt the machines to it.
How are the ovens heated: electric, gas or thermal oil?
All of these are possible: electric, gas or thermal oil. They can even run on solar or wind energy.
How much water does a line use, and what happens to the waste water?
That depends on the machine you buy. Most water is used for leaching. The waste water is checked, filtered or cleaned, and then discharged to the sewer.
Can you help with the layout of the factory?
Yes. For a complete turnkey factory we always supply detailed drawings with the order: how the factory should look, and where the connection points for electricity, gas, water and compressed air will be.
Raw materials, advice and service
Where do we get latex, nitrile and chemicals? Can you name suppliers?
We discuss this with customers who have placed an order with us. Then we look together at which raw materials you should buy to make good products.
Do you buy used machines, or help with selling them?
We do not buy used machines, but we do help with selling them. See our Pre-owned Machinery page.
Can you first visit us for advice, and what does it cost?
Yes. If you want to buy a machine, we normally always come to visit: talking is easier and saves many e-mails. We do ask you to pay the hotel and the travel and accommodation costs on site. We usually arrange the flight ourselves.
In which languages are the manual and the machine controls?
We usually supply the manual in English, and if needed translated into your own language.
Can you help remotely, via the internet, when there is a breakdown?
Yes, if the machine has a control system (PLC) with an internet connection. Then we can log in from the Netherlands and see what the problem is.
About Dutch Dipping
How long have you been building dipping lines, and in which countries are your machines?
Our company has existed since 1946. Our machines are in Africa, in the Far East and in South America: in fact in the countries where latex trees grow and latex is harvested. That is where we sell our machines.
Can we contact a customer who already has one of your lines?
For us that is no problem. But our customers usually do not like to let in someone who wants to buy the same machine: they do not want a competitor who will later make the same products on the same machine.
Products
Can you also build lines for balloons, finger cots or catheters?
Yes. For all these products we can make a small, a large or a very large machine.
Can you make powder-free gloves?
Yes, we can make powder-free gloves.
Can we make different sizes or thicknesses on one line?
Different sizes: yes, with the formers for those sizes. Different thicknesses at the same time: not really, because the thickness is formed in the dipping tank, together with the coagulant. A different thickness is possible, but then the tank has to be adjusted: a different coagulant or latex, so a different formula.
Can you make coloured or printed products?
Coloured products: yes. We do not print in the line.
Technology of the line
How are the products taken off the formers: automatically or by hand?
That depends on the machine you buy. Usually it is done automatically. A difficult product has to be taken off by hand, and on small machines it is mostly done by hand.
How are the formers cleaned?
Most formers are cleaned in the line, while they are on the dipping line. Some formers can also be cleaned outside the line, in separate small machines. So both are possible.
Which control system do you use, and can we adjust it ourselves?
We use a PLC (a control computer). The customer tells us which brand he prefers, because that brand is represented in his country. Once we have taught you how to adjust the programs, you may do it yourself. We can also do it for you, remotely via the internet.
Can the line be made faster or bigger later?
Faster: yes, if other formulas are possible and after some trials with the line, it can run faster. Bigger: yes, because we use a Monorail. The Monorail can be changed, extended and made bigger; that is exactly why the Monorail is a good idea.
Is the quality checked in the line itself, for example with a camera or an electrical test?
From time to time products are taken off the line to be checked in the laboratory. Cameras and electrical tests in the line are possible if the customer wants them, but that is not very common.
Do you also supply packaging machines?
Yes, we also supply packaging machines.
Maintenance and lifespan
How long does a line last?
Our lines last a long time, provided they are well maintained. Some of our machines have already been running for ten to fifteen years.
How much maintenance does a line need, and can we do it ourselves?
You receive a manual that describes the maintenance: weekly, monthly and yearly. If you follow it carefully, the machine keeps running, 24 hours a day. The line does not stop, so the maintenance is done during production.
How quickly can you deliver spare parts?
That depends on the type and the model. We know which parts can break and which need to be renewed. We already supply them with the delivery and handover of the machine, so the customer usually has them in stock.
How long does the training of our people take?
While we set up the machine, we already teach your people how to work with it. Once the machine is in production, we take about 14 days to train the people well. Later we can always give more training.
Agreements and preparation
Does the line have CE marking, and which papers do you supply for customs?
Yes, our machines have CE marking. Of course we supply the right papers, because the machine has to pass customs in the country where it will be installed.
Can we see the line running and approve it at your premises before it is shipped?
We assemble the machine at our premises and run it mechanically. We do not make any product yet, because we usually do not have the liquids, nor the connections for heating the ovens. So the machine can run, but only mechanically. You are welcome to come and watch.
How much latex or nitrile does a line use per day?
That depends on the machine you buy, so we cannot give a general figure. Tell us what you want to make, and we can calculate it for you.
What do we need to have ready before the line arrives (building, power, water, people)?
You receive from us a drawing of the floor, showing where everything has to be connected. That gives you a clear explanation of what you need to have ready when we arrive with the machine.
Is your question not here? Contact us by WhatsApp, e-mail, phone or the contact form.
Contact us